We have a wide range of Dust Collectors which comes in different ranges such as DC-40-80-100. Out of these three ranges, the DC-40 is powered by a fan which is directly mounted on the shaft of the induction motor. Then, the motor and fan are both designed for continuous operation in severe conditions. Other than this, the DC-80 and DC-100 employ a fan which is driven through a V belt and pulley by a 3 hp and 5 hp induction motor. Further, these dust collectors provide suction power ideally suited for collection of large quantum of dust at source. Moreover, a Mini Cyclonic Separator, which is attached with the stationary dust collectors and is added to collect line dust and eliminate filter clogging. After this the primary collection is dome through cyclonic separator.
COMPONENTS | DC 40 | DC 80 | DC 100 |
Motor | 440V, 3 Phase, 0.5 hp | 440V, 3 Phase, 3.0 hp | 440V 3 Phase, 5.0 hp |
Air Displacement | 400 m2/hr | 1100 m2/hr | 1200 m2/hr |
Closed Seal Suction | 200 mm WG | 500 mm WG | 750 mm WG |
Dust Collection Capacity | 7 litres | 14 liters | 14 liters |
Dimensions in mm | L-650 W-600 H-1500 | L-950 W-470 H-1500 | L-950 W-470 H-1500 |